1 / 3
Honda Fury Ginz Sissy Bar Drill Jig
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this jig to perfectly align holes for mounting the Ginz Sissy bar on a Honda Fury.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
The jig self aligns on the center fender support. Lightly clamp the jig to the frame. Use a 1/8" drill bit to create a pilot hole. Drill all the way through both sides of the frame. Next open the holes using a 5\16 bit. Ginz recommends a 23\64 bit but this jig aligns well enough to use a 5\16 which prevents excessive clearance and movement of the sissy bar when mounted.