Razer Kishi Galaxy Z Fold2/3 Adapter (Metric hardware remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of keirmeister's v2 adapter of the same name. None of my metric fasteners would fit the original, so…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is a remix of keirmeister's v2 adapter of the same name.
None of my metric fasteners would fit the original, so I've modified it to accept M3 socket head cap screws up to 16mm long and M3 hex nuts. The original 'platter' also had a large-ish radius right above the print bed which always printed pretty badly for me, so I've replaced it with a 45 degree chamfer which is much easier to print. Both left and right inserts have been updated as well so the chamfer flows across the assembly.
New for the remix are TPU inserts. These were printed from eSun TPU 95A and mean the original rubber pieces don't need to be cut. They were designed to fit a Fold 3 with a thin case, but should also work with no case.
Print Settings
Printer:
Voron 2.4
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Filament:
eSun ABS+ / TPU 95aBlack
Notes:
Printed with 4 walls and 5 top/bottom layers.
Category: Mobile Phone
