Ukulele strap clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed from scratch in Fusion 360, but used the design from ARC7217 (https://www.thingiverse.com/thing:2819279) as a…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 177
- Wydruki
- 2
- Wyświetlenia
- 712
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Designed from scratch in Fusion 360, but used the design from ARC7217 (https://www.thingiverse.com/thing:2819279) as a starting point.
Slightly longer so that the hole to put the strap in goes outside the Ukulele body (at least it does on mine :) )
The clip is also narrower near the edge so that the clip will stay in place. The narrowest part is 2.25mm, and the widest part is 3mm.
I also made the bottom round, so it will fit my Ukulele more snugly. This will fit a Ukulele with a 60mm diameter hole snugly, but might work for others as well.