1 / 4
Ender 2 Pro Mini Satsana 50mm heatsink fan mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Mini Satsana for Ender 2 Pro, just with a bigger heatsink fan
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (18)Powiązane
I wanted to use the Mini Satsana, but I only had 50x50x10mm fans lying around. So I made this very rough modification in Tinkercad.
After another couple of revisions I fixed some problems with the original model, made the new version more printable, and improved its looks a bit.
For the main fan I used 3x25 wood screws, and for the part cooling fan 3x20 wood screws. The original shroud screws are a bit too short, so I stole some from the printer's bottom cover.