1 / 6
SONIC PAD TOP MOUNT
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sonic Pad top mount for Ender 3.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 567
- Wydruki
- 8
- Wyświetlenia
- 2290
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 8) (Komentarze: 10)Remiksy (2)Kolekcje (69)Powiązane
Original design from csantos07.
Model has been re engineered, clip system consolidated and adjusted.
Printed with PETG.
Nozzle 0.4
Layer height 0.2mm
Print speed 60mm/s
Infill 20% (cubic adaptative)
I've used the 2 original screws from the sonic pad, and added 2 M3x8 screws at the bottom.