Steam Deck Dock for Zacques Kickstand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dock specifically made to accommodate Zacque's kickstand clip, but will work with bare Steam Deck's as well
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently printed (and then remixed) Zacque's Steam Deck Clip on Stand (kickstand). As I wanted to also dock my Steam Deck so I can connect to a larger screen on occasion, it meant that many of the “proper” docks wouldn't work without having to remove the kickstand.
I had a stand alone dock that I had used for my old gaming laptop and decided to put it into a dock for the deck. A Deck Dock if you will (I'll get my coat…).
The dock I used is from Amazon and is called: UGREEN USB C Hub 4K 60Hz, 7 in 1 USB C HDMI Multiport Adapter with 1Gbps Ethernet, 100W PD, 2 USB 3.0 Data Port, SD/TF, USB C Dock https://www.amazon.co.uk/dp/B093FKT9BF?psc=1&ref=ppx_yo2ov_dt_b_product_details
The 3MF file has the main dock orientated the correct way for printing, and I have added the support enforcers where needed. The Ethernet port is also exposed but to reduce the amount of support material needed, it is blocked off with a 0.2mm thick layer which will support the cutout for the port. This will need to be cut away before inserting the dock.
I would also suggest buying a 90 degree USB C adaptor. I brought “90 Degree USB C Adapter (2 Pack), AuviPal USB C Male to USB C Female Right Angle Connector” https://www.amazon.co.uk/dp/B0B8X6H96S?psc=1&ref=ppx_yo2ov_dt_b_product_details
Once printed, remove the supports, cut out the Ethernet support, insert the dock (it was a tight fit for me but not to tight) with the USB ports facing forward and the HDMI facing rearward. Finally insert the legs into the rear.
If printing from the STL's, the dock is designed to be orientated so that the side with the slot is on the print bed. The lip where the clip will go needs to have support as well.