Steering arm for a mini RC toy car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have recently built RepRapPro Mendel, and installed OpenSCAD to learn how to design physical objects. I have decided…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I have recently built RepRapPro Mendel, and installed OpenSCAD to learn how to design physical objects. I have decided to start from something small, so this is the first model of mine: a steering arm for a mini RC toy car. How small is that? It is about 9 x 12 X 4 mm. From now on, in case if your child accidentally steps on one of their favorite RC toy car, and steering arm is broken, you can print a replacement part (of course if the broken car is the same as the one on a picture).
In mine case the left steering arm was broken, but I have also prepared STL for the right part (left steering arm is SteeringArm_l.stl, the right one is SteeringArm_r.stl).
Instructions
I have printed it using PLA with 0.4 mm layer height, but if you don't have 5 spare minutes to clean the result with a file, you can try to print it with higher precision and probably using ABS. Also, I have turned on cooling fan ( http://www.thingiverse.com/thing:32465 ), and that gave me the acceptable result. Note that installing of the detail into a car is not as easy as printing of it, so be patient and accurate. :-)
Category: R/C Vehicles