Raspberry Pi Zero frame for Einsy Rambo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To help find and guide pins during soldering and maintain proper distance during instalation.
- Ocena
- 4,887 / 5
- Polubienia
- 609
- Pobrania
- 14 266
- Wydruki
- 174
- Wyświetlenia
- 34 037
- Oceny
- 194
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer.
https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180
If you prefer a step-by-step guide, it is available here:
https://help.prusa3d.com/en/guide/octoprint-for-original-prusa-i3-mk3-1-preparing-necessary-components_95536
rpi-zero-frame is a helpful tool to find pins on Raspberry Pi Zero W during installation and also to maintain proper distance from Rambo board when installed. It acts as an electrical insulator do you don't short circuit contacts on the Einsy Rambo board.
raspberry_cover is simply a cover to create a protection for the already installed RPi Zero W.
Print instructions
PrusaSlicer's default PETG 0.2mm presets.