Prusa MK3s Compact Horizontal Spool Holder [No bearings required]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spool holder is easy to print, requires no bearings whatsoever, and makes for a very slim package on the mk3s.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 57
- Wydruki
- 2
- Wyświetlenia
- 596
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
DEPRECATED:
After a long time of testing, I decided to stop using it. The designed is flawed (if printed with PLA) and no matter what you do it will bend over time. Not recommended.
This spool holder was designed to meet the following requirements
- A spool holder that barely increases the overall height of the printer, so that it fits in not-very-tall cabinets
- A simple print, no support required for printing
- A no-bearing design: Relying on design for not requiring to use of bearings.
- Compatible with a range variety of spool dimensions: From 50mm to 95mm spool width, and 45mm to 18mm diameter through-hole.
With that In mind, I came up with the following design:
If you print with either PLA or PETG, the very little friction the material offers will allow for a perfect rotation. As a fact, it almost spins way too easy!
The main arm is split into 2 parts so that the shape can be printed easily. I recommend to use extra infill in the arms so that there's more strength where the arm holds to the printer, as such:
For all of the other parts, 10% infill will be more than required.
The threads of the spool holder itself have been designed with 3d printing in mind, so they are very loose and you shouldn't need to adjust the part size for them to fit perfectly.
Please note that after you use it for a little bit, especially if it is PLA, the arm will bend a little bit. This is intended! This way, the spool holder itself will never hit the arm itself and will keep rotating freely.
I also recommend using a filament guide on the opposite side as the filament exit direction for making sure the spool doesn't tangle when retracting. I personally use this one and works like a charm.
Potentially, you can print everything on an Mk3s bed, although I recommend printing the spool and arms on separate prints for convenience

