Wen Fence Setup Tools - Updated with Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tools to center the drill table/fence to the bit. The Square doubles as a temple/alternative insert for the drill press.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got the clamp-on Wen adjustable table/fence and made this quick setup system so I could center the table every time.
Step 1: Place the Wen Fence Center in the hole on the castiron table. Align the drill with a 1/4in drill bit to ensure the drill and table are centered.
Step 2: Place the adjustable table on the drill with Table Insert Setup Block in the middle. Line up the hole by eye, then lower the drill bit 1/4in to align all the parts. Check the back of the fence/table to ensure it's parallel with the cast iron table, then lock it down with the clamps provided with the adjustable table.
Bonus: You can use the Table Insert Setup Block to cut other inserts or as an insert if you need extra.
Enjoy!
Used on WEN 4212T and WEN DPA2412T
Updated: V2 I added the embossed WEN logo and a spot for a 6mm Magnet so you can store them on the drill base. If you edit the step files, please tag me on the reupload.