Wall mount for Lego Star Wars X-Wing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a wall mount for Lego Star Wars X-Wing sets
- Ocena
- 4 / 5
- Polubienia
- 68
- Pobrania
- 388
- Wydruki
- 1
- Wyświetlenia
- 2373
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I decided I didn't like the wall mount options provided by companies like Ultimate Display Solutions, so I made my own that will hold ships at an angle like they are flying. Currently this model fits X-Wings with the S-Foils open in attack mode. Please note this DOES NOT fit TIE fighters, I am currently working on one for TIE fighters.
You will need a 2x4 plate with holes to serve as the interface between the Lego set and the bracket, to preserve the tolerances Lego components keep. I recommend #4x1/2" countersunk Philips head screws for this, I used 35043 screws from Hillman, available at most hardware stores. For wall mounting, I used #8-10x1-¼" anchors with #10x1-½" screws, available as a pack from Lowe's, Project Source #0326629. Overkill, I know, but I wanted to make sure there wouldn't be any incidents with gravity in the future.
Printed in Hatchbox white PETG with a PRUSA i3 Mk3 at stock PETG settings, supports on.