Flagpole Business Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desktop flagpole that holds a single card as a flag, with additional card storage on the base
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This desktop flagpole holds a single business card (standard 3.5" x 2" size) at the top of the pole, with additional card storage on the base.
Prints well with PLA (only tested with eSUN glossy PLA), tight tolerance in the base/top pole interface (light sanding/blade trimming may be required for a looser fit).
Holds a standard cardstock card tightly, but a sharp blade can be used to open up the clip in case of thicker cards.
The tall height of the thin pole may be tricky for some printers, so I recommend slower print speeds towards the end to prevent wobbling. I would also recommend printing the top pole portion vertically, with a raft.
Printed with:
0.4 mm nozzle
0.28 layer height
Raft suggested for the top pole portion
No additional supports
Work in progress:
- Will re-model to make the pole detachable from the base, making this a 3 part assembly
EDIT: 3 part assembly components added as “V2”