Rotary Support Leveller - Roller 3rd Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotary Support Leveller - Roller 3rd Axis for Laserpecker, Xtool, Neje, Ortur, Atomstack and other brands
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 199
- Wydruki
- 0
- Wyświetlenia
- 2491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rotary Support Leveller - Roller 3rd Axis for Laserpecker, Xtool, Neje, Ortur, Atomstack and other brands
Helps level the roller or products such as non cylindrical items such as flasks, wine glasses, pint glasses etc etc…
This part is just the leveller
Add the Tensioner arm and end stop for the laserpecker roller/ 3rd axis to help keep the product from wondering down the roller here: https://www.printables.com/model/361785-laserpecker-3rd-axis-roller-tensioner-arm-and-end-
Hardware required:
Main body: M8x100 hex bolt and nut x2
Main body and top: M4x14 x2
Main support: M5x30 x2 with 2 nuts each and 3 washers each
Arm connector M5x20 and nut
2x 625RS Bearing, 5x16x5mm Miniature Bearings
Printing: All can be printed well as orientated at 0.2mm layer height. You can also go higher/ lower if need be. 7-10% infill should suffice but some parts you can go more if you like! PLA is fine.