E3D Volcano upgrade for Prusa i3 Mk3/s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These parts are based on the Original Prusa i3 MK3/s parts, they've been modified to fit the E3D - Volcano hotend.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 244
- Wydruki
- 0
- Wyświetlenia
- 3345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
These parts are based on the Original Prusa i3 MK3/s parts, they've been modified to fit the E3D - Volcano hotend. Modifications include
I lifted the body 8.5mm to account for increased hotend height. (no firmware change required for z-heights)
Adjusted cable paths on a few parts to account for new wiring path.
Increased volume in wiring channel to allow for a silicone wire upgrade.
Designed new part fan shroud.
Lowered P.I.N.D.A probe mount accordingly.
Adjusted Cable holder to accommodate wiring change.
I am using this current version on my own printer and its been working great for over a month now, if you are unable to print this mod I am also selling them on these sites
Etsy
https://www.etsy.com/ca/listing/989137286/prusa-i3-mk3s-volcano-upgrade