Laserpecker baseplate pin jig L/Straight jig and elongated pins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laserpecker baseplate pin jig L/Straight jig and elongated pins
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 393
- Wydruki
- 1
- Wyświetlenia
- 1350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Laserpecker baseplate pin jig L/Straight jig and elongated pins
Remix of SANDRO PERUSINI version of L/ Straight jig
https://www.facebook.com/groups/lp2users/permalink/1636318066707720
Created channel and longer pins used from the main baseplate jig https://www.printables.com/model/361897-laserpecker-jig-base
Pins should be resized and tested. X/Y on my printers work at 4.65mm. They should not be too loose and not too tight that they are hard to remove.
Can decide to have 2Ls for easier adjustments
Recommend a minimum of 4 pins for the L and 2 for the Straight.
Careful when removing. Pinch the pins out.