Pet bottle cutter 8mm (probably a bit complicated, but why not..)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pet bottle cutter 8mm. Why make it simple if you can make it complicated? So i did..
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 738
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Congratulations for finding the most unnecessary over complicated over engineered 8mm pet bottle cutter ever (probably).
It might not help you cut pet bottles better or faster than other pet bottle cutters, it might even not work properly at all, but it's nice to look at and will easily impress your friends (if you have any), it's complicated to put together and takes a long time to print, so i promise, you'll love it.
Things besides the prints you might need to make this wonderful beast of a bottle cutter to work:
3ps 15x1.8mm metal washers or what you might have laying around that fits in the slots.
1ps Stanley / utility blade.
1ps 400x8mm rod, not a requirement but makes the bottle cutting smoother.
It's printed in six pieces, put some washers in the bottom piece, ad the the two middle pieces on top of the washers. Put the cutting blade in the slot, and add the shims to make it fit properly in place. Add the top lid. use some clamps or attach it with screws on to a flat surface. Ad some sort of 8mm rod in the top hole.
Now you are ready to start to use it. WARNING!! a pet bottle that's been sliced with this contraption might not hold liquid afterwards. Use at own risk.
-Never mind, don't ad the rod in the top hole, it works better if you put a new hole in the table you just screwed the the cutter in to and place the rod in that, but don't do that, just buy some PETG filament instead, and make life easier.
Have a fun pet bottle cutting time, or not…