1 / 2
SHERPA MINI EXTRUDER MOUNT FOR ENDER 3 WITH CRTOUCH — zdjęcie 1
1 / 2

SHERPA MINI EXTRUDER MOUNT FOR ENDER 3 WITH CRTOUCH

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SHERPA MINI EXTRUDER MOUNT

Ocena
0 / 5
Polubienia
22
Pobrania
148
Wydruki
0
Wyświetlenia
944
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a lightweight Sherpa Mini extruder mount/holder/bracket for Ender 3. Compatible with Creality CrTouch. It is small and light.

This is my own desing and I printed it from ASA filament. You may use any filament that resist high temperatures and is stiff enough.

You need two M3 bolts/nuts and some PTFE bowden tube for installation. CrTouch installation bolts should fit. You may need some spacer shims between CrTouch and bracket depending how high or low your hotend is.

See image how it fits. It goes between top roller bolts and X carriage.

If you like my design, please leave a rating or a comment. Thank you!

Tagi