PiStation Raspberry Logo Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the original design for the retropie case, but a friend of mine didn't like the PS logo on it so I decided to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I love the original design for the retropie case, but a friend of mine didn't like the PS logo on it so I decided to put the raspberry pi logo instead for her :).
The model on the picture is relatively rough as I wanted a quick print to see if the logo would be OK, so I'll probably make a new one printed eventually with 0.1mm resolution to increase the quality (although after sending/painting this one I presume it will look just fine as well)
All credits to https://www.thingiverse.com/samhazel for making the initial remix
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Vox PLA White
Notes:
Printed with 3 Outline/Perimeter Shells but it was probably an overkill as 2 would do just fine
Category: Computer