1 / 6
Lego Rolling Stones 3M Command Strip wall mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounts for Lego Rolling Stones. Designed for 3M Command picture strips.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 2026
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to work with the 3M Command picture hanging strips (velcro-stlye), these allow you to mount the Rolling Stones Lego Art on your wall.
- I used PLA @ 100% infill, but infill makes little difference on a piece this small.
- No supports needed but I did use a brim as otherwise the contact patch is very small when you print it standing up.
- You do need to move a couple of the Lego pieces on the back, but it doesn't affect the Lego in any way.
- You'll need to print 2 of course - took about 3.5hrs on my Prusa Mini with 0.6mm nozzle.
The mounts don't friction fit in the lego so I put a bit of tape on them to hold them in place while I mounted the model.