1 / 1
French cleat Holder for Bridge City UG1 and mini square
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was a holder I made to safely store some tools on the wall from Bridge city.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 41
- Wydruki
- 3
- Wyświetlenia
- 530
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (24)Powiązane
This is a French cleat holder that will work on ¾ inch cleats. This was specifically designed for the Bridge city UG1 measurement tool. This can be used for either left or right side tool. This can be used with or without the pegs. If you want to use the pegs just apply some CA glue to peg 1 right under the top corner of the opening. I also include some additional pegs to be used to mount the small mini square on the same holder if you choose. These are pegs 2 and 3