1 / 2
Filament Cutter Lever for Bambu X1 (Model Only)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find magnets that worked with the hall effect sensor but the model may be of use to some.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 228
- Wydruki
- 3
- Wyświetlenia
- 1590
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 10)Remiksy (3)Kolekcje (77)Powiązane
IMPORTANT!
- The remixes of this model are the fully functioning models which are compatible with the magnetic hall effect sensor. This is simply a 3d model than can be used for further development.
These are just models that I made from measurements of the filament cutting lever on the Bambu X1C. They aren't functional as is due to not being able to find the right hall effect sensor magnets. This model may be of use to someone experimenting with it, so have at it.
I wouldn't reccomend using this because it will lead to issues with the machine not detecting the filament removal. Check out the working versions that others have remixed from this!