1 / 1
Woodboard wedges (2,8, 4,0 and 5,0mm) — zdjęcie 1

Woodboard wedges (2,8, 4,0 and 5,0mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wedges to have between boards when making a porch or similar

Ocena
0 / 5
Polubienia
3
Pobrania
19
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

*** Updated Januari 2023 with the "non-support" version ***

I actually try and make "useful" parts for when me and my GF continues to renovate and build on our house.

Instead of having different things to put between the porch wooden boards when we attach them - I wanted a measured wedge to go between that are all the exact same measurement.

So, we decided to go with 2,8mm... not only a fair distance for when the boards "move" - but about the size of seven 0,4mm nozzle-widths.

We also added a 4,0 and a 5,0mm wedge, since there are always boards that eventually becomes a little "off" - so by adding the extra distance to some boards, it catches up after a few rows.

Even though the measurement is "written" on top - I suggest to print them with different colors per size. :)

Hope you find them as useful as I have

Print instructions

Material - PETG
Layer height - 0.2 or 0.3
Infill - 15%
Perimeters - 4
Support - Not needed

(These models are published on my Thingiverse account as well)