Raspberry PI Vesa Mount (also for heatsink)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2020-07-09: I needed a VESA mount for my raspberry pi 4 which has this heatsink installed:…
- Ocena
- 4,833 / 5
- Polubienia
- 43
- Pobrania
- 288
- Wydruki
- 5
- Wyświetlenia
- 1951
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2020-07-09:
I needed a VESA mount for my raspberry pi 4 which has this heatsink installed:
https://shop.pimoroni.com/products/aluminium-heatsink-case-for-raspberry-pi-4?variant=31116595888211
However I thought it would be nice to just be able to use the same screws from the heatsink to also fasten the pi to the bracket.
And because I am lazy and did not want to measure which VESA mounting holes my TV has I just added a bunch, It can now be installed on VESA:
20 x 50
35 x 75
50 x 50
75 x 75
100 x 50
100 x 100
100 x 200 (using only 2 holes)
50 x 200 (using only 2 holes)
I also made sure the heatsink was about 15 mm away from the TV to prevent any heat from the tv to transfer to the pi. Also the added space helps with changing the sd card.
Please note: this bracket could be used for all Raspberry pi's (with or without a heatsink)! I also included the mounting holes for the Pi zero.
Please note2: I still have to connect all the cables so I have no idea if the columns need to be stronger but I will do this in the coming days.
Print instructions
I could print this without supports for the columns as the overhang is very small that big.