SP-5 V1.1 TD6 Toolhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For SP-5 V1.1 TD6 hotend, Orbiter/TBG-lite mount available 4010 axial fan for heatsink, two 4010 blower for part cooling
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 1053
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is TD6 upgrade for TwoTrees SP-5 V1.1 (previously Sapphire Plus).
It uses stock head mount.
Two small hole on extruder mount is for USB-ADXL345 made by TriangleLab.
If you planning to use TUN(TriangleLab Unity Nozzle), due to its shorter length than normal configuration(Matrix heatbreak+V6 nozzle), you cannot use it.
Important note
Lead screw will be bumping into part cooling duct.
I cut stock lead screw(390mm) about 10~13mm with hacksaw.
(Update : I changed them with 380mm lead screws those I bought on Aliexpress.)
Alternatively, you could limit printer to avoid bumping.
BOM (I suggest you have extra fasteners.)
1 x TD6 hotend set
1 x TBG-Lite (exclude if you want to use other extruder) / Orbiter 2.0
1 x 2m CHC heater cable
1 x 2m CHC thermistor cable
1 x 40mm axial fan (Cable may need to be extended.)
2 x 40mm blower (Can be stripped from stock toolhead)
2 x M3x8 Button head screw (TBG-LITE mount)
2 x M3x10 Button head screw (TBG-LITE mount)
4 x M3x12 Button head screw (40mm axial fan)
4 x M3x25 Button head screw (Front mount and back mount)
4 x M2x6 Socket head screw (6 if you want to attach USB-ADXL345)
4 x M2x12 Socket head screw
2 x M2.5x8 Socket head screw
4 x M3x12 Socket head screw
8 x M3x5x4 Brass heat set inserts (10 if you go with Orbiter 2.0)
Print setting
You should use PETG at least.
4 perimeter(wall) and 5 top/bottom layer, 40% infill
If you have any question, please leave comment.