1 / 4
TPLink Tapo c2x0 Mount to Snapmaker 2.0 enclosure (hang-in) — zdjęcie 1
1 / 4

TPLink Tapo c2x0 Mount to Snapmaker 2.0 enclosure (hang-in)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for TPLink Tap c2x0 modified to hang-it into the snapmaker enclosure

Ocena
0 / 5
Polubienia
15
Pobrania
78
Wydruki
0
Wyświetlenia
762
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

See photos.

Print with support. I used snug and 4 mm pattern spacing. Worked really well. 0.2 mm Layer height

Two versions 0deg and 90deg. With respect the desired position of the camera you should choose the one that suits best. With the attached 3mf-File every other orientation should be available as well.

Tagi