A12 Damper-tester adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The rear damper on the 1/12 Awesomatix A12-car can be tested with a "diff-tester-tool" with this adaptor
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
As owners of an A12 know, the rear damper is not so easy to rebuild 100% consistently.
That is why some use a diff-tester-tool to measure the dampening-effect of the damper.
But for this you need an adaptor.
In a film, made by mr Marc Stiles, I noticed the prototype-adaptor that they used was not very stable .. and that's not ideal when you measure things.
I designed one that i provided of M3-thread-inserts.
I used two, opposite positioned to maximum balance the adaptor.
As not everyone has such thread-inserts …
… I also made a design with 3d-printed threads. I designed these threads rather long to give maximum grip for an M3-bolt.
All feedback is apreciated.
A big thank you to Laurens S. who gave me excellent feedback :)
Cheers mate.
I'll provide some pictures of the tool later.
IMPORTANT:
The gcode-files, starting with "2C_" have a colorchange integrated.