LED Kit for LEGO Bonsai Tree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cheap DIY kit to add LEDs to LEGO Bonsai Tree, including RGB control from your phone
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 1559
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Add some lighting to your LEGO Bonsai Tree with this kit. It's a quick and cheap build - all of the components can be bought for less than £5 total!
The LEDs are controlled from your web browser (on a phone or PC) and the RGB setting can be fully customised to fit your display.
Arduino files and build instructions can be found on the Github page
You will need:
| Component | Example Link (what I used) |
| Wemos D1 Mini ESP8266 (or equivalent clone) | D1 Mini Clone |
| 4x WS2812b LEDs | LED strip |
| <1m wire | 32awg servo wire |
And some parts you probably already have:
- <10g 3D printing filament
- Micro USB cable and 5V USB power supply
- WiFi Access
Note: be careful with wire selection, if you use the 32awg cable I listed above, you must not wire all the LED power in series as the current will exceed the rating of the wire. Instead, use thicker wire and check your specs! You need to support ~240mA maximum continuous.
Printing:
The parts can all be printed from any rigid filament at standard settings and should use <10g of filament total.
You will need 1x ‘d1_mount’ and 4x ‘LED_mount_brick’
Build Instructions:
The build instructions and arduino code files are all on the Github page!