Nano VNA V2 enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi, An enclosure for the Nano VNA V2. With a holder for the open, short, load and barrel connector. under a lid.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 2311
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Hi,
An enclosure for the Nano VNA V2.
With a holder for the open, short, load and barrel connector. under a lid. The stylus has it's own place too. It can be used to take out the SMA connectors.
If you have some transparent filament left you can push it in the holes under the power switch as light pipe for the charge indicator leds.
The lid will stay shut on friction but if you don't trust that, there is room for small magnets in the lid and in the body.
https://nl.aliexpress.com/item/4001135049177.html
please print it in PLA because that works SO much better then PET (ask me why :-D )
Print "Top" with support.
Print the lid with the text down for a nicer look.
Use the screws which came with the VNA. The long ones for the bottom ( only 3 ) and the short ones for the display
For Belgian and Dutch radio amateurs there is a lid with the name of your society.
73's
Wilfred
ON4NDO