Support GoPro Hero+ LCD for motorcycle fork
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update : the support was a little bit to tiny for the GoPro Fixation. So I modify it a little bit. Now it's perfect…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Update : the support was a little bit to tiny for the GoPro Fixation. So I modify it a little bit. Now it's perfect for mine as you can see on the photo.
This is a support to put your GoPro Here+ LCD on the front fork of your motorcycle.
The diameter is 57mm, for my fork it is to large but I've added some rubber inside to avoid vibration and not scratch my fork.
Print Settings
Printer Brand:
Printrbot
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Notes:
Print it with a lot of infill it will take a lot of stress with the wind speed.
Category: Automotive