1 / 3
Remix: Bench Power Supply. Fixed ATX PSU Screws, 20mm longer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brought the models in to MeshMixer to support a 20mm longer PSU. Also, the top PSU Screws were swapped left to right.
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 173
- Wydruki
- 0
- Wyświetlenia
- 2557
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (117)Powiązane
This only contains the adjusted parts. See the original design for the faceplate and front housing.
NOTE: Adding a large reddit thread where I've discussed a lot of details: