1 / 1
MisteRdeck - Modified Lid for 75mm Sliders (60mm travel)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits more common larger 75mm sliders (60 mm travel).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
I was having a hard time finding the 60mm (45mm travel) linear sliders used in this project so I modified the lid to allow for the larger 75mm (60mm travel) sliders that I had in stock reclaimed from an old Peavey mixer I salvaged parts out of. Hopefully for the people like me who have these (in my opinion) more common sized ones it'll come in handy.
Printed with great success with these settings:
- finished side down
- no supports
- 10% gyroid infill
- .8 walls (x3)
Strong as the original. I was concerned that with the larger hole it wouldn't be as solid but there is no issue with it at all.