Gas Canister Stand A (65mm, 90mm, and 110mm) v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to improve stability of 3 different types of gas canisters commonly used with backpacking stoves.
- Ocena
- 4,5 / 5
- Polubienia
- 53
- Pobrania
- 502
- Wydruki
- 7
- Wyświetlenia
- 3267
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand to add additional stability 3 different types of gas canisters commonly used in backpacking/camping stoves (65mm, 90mm, and 110mm). The goal was to make a gas stand that fits several different sizes of canisters, without any need for additional parts. Just print and assemble.
Tested with Campingaz CP250 (65mm) and Coleman C500 (110mm).
Different version of the same design here.
Notes:
Print 1x central part and 3x legs
It is crucial that you print the legs on their “side”(i.e. with the hollow sections touching the bed on one side) for maximum strength.