Simple Incense Stick Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple incense holder for sticks roughly 8 to 9 inches in length.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 829
- Wydruki
- 8
- Wyświetlenia
- 2237
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Just a simple incense holder for sticks roughly 8 to 9 inches in length. The hole for holding the stick is modeled as 80 thousandths of an inch. Depending on your printer tolerances, it may need to be enlarged. It's best printed on its side with ‘Support on build plate only’.
UPDATE: I've realized that depending on the position of the incense stick, the ash has a chance of dropping off of the holder, so I've designed an even wider holder to accommodate this. The updated file is called ‘INCENSE HOLDER 45 (WIDE).stl’. Hopefully, this reduces your mess as well.