Floor cradle for Janome sewing machine foot control
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This support under the foot control stops it marking and damaging the house or unit wall
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 581
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I noticed that with continued use the wedge shape of my wife's sewing machine (model Janome 4300 QDC) foot control was being pushed against the wall under the worktop and the movement caused it to make marks on the decorated wall.
What I have quickly designed using Tinkercad is a simple floor cradle that the foot control can sit in, but which holds the foot control away from the wall/skirting board. In this way it cannot reach the wall to cause damage. It also make sure the foot control works more smoothly in open space. It was designed to use a minimum of filament and no supports are necessary. I used PLA and it has proved a winner with my wife.