Minimalist RFID Wallet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalist wallet redesign to fit my exact needs. I liked the way it looked, so I'm sharing it.
- Ocena
- 5 / 5
- Polubienia
- 154
- Pobrania
- 536
- Wydruki
- 6
- Wyświetlenia
- 7190
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
A model I made in Fusion 360. A friend just got one of those fancy $100 wallets. And I decided I was going to make mine instead of purchasing it. So here we are!
I did about 5 versions of the wallet before I settled on the final version.
To finish the wallet off, I used about 5-8" of 1" elastic. I chose to use the stuff with the rubberized bits. Sewn as shown in the picture.
14 M2 or M2.5 4mm screws from a random screw set I had laying around.
and some aluminum foil cut to size using the template provided. This is to help with RFID protection.
Interior Material is IEMAI PETG in Red
Exterior Material is Flashforge PLA in Burnt Titanium
I used CURA to slice the files for my Ender 3 Pro.
.16mm Layer Height and appropriate settings for each material
To get the pattern I have in the images, use
"Bottom Pattern Initial Layer" "Concentric"