1 / 1

Airsoft M4 39 BB magazine, rubber band

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Aktualizacja u źródła: 29 kwi 2023

Informacje o modelu

3d printable m4 airsoft magazine

Feaures

- Capacity 39 BBs

- Durable design

- Lightweight at 64g

- Low cost per magazine

- Full magazine indicator

Requirements

- Rubber band (24cm in length)

- Pencil spring (4mm in diameter, 1.5cm or 2.0cm in length)

- 5 nails (1.5mm in diameter, 1.3cm in length, nail head is less than 4mm in diameter).

Prints

- Print 3 small pulleys (other parts you need only one)

- Parts are best to be printed in the same orientation as shown in the picture

- Infill 10% for Magazine_body

- Infill 50% for Magazine_top

- Infill 0% for the rest

- No supports or rafts

- Any hard filament material will work, like PLA.

Other note

- You can buy rubber bands, pencil springs and nails in bulk from aliexpress.

Videos

Magazine overview video

Magazine assembly video