Saw Blade Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessory to store and protect the teeth of a 12" or 10" circular saw blade
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This protects the teeth and provides a way to hang a 1/8" or 3/32" width, 10" or 12" diameter saw blade.
Designed to be printed at .2mm layer height. Requires build plate support except for hookA, which requires support everywhere.
12" blade - print 14 copies of bladeguardA and bladeguardB. Requires 16 m3*10 machine screws and nuts.
10" blade - print 11 copies of bladeguardA and bladeguardB and 1 copy of bladeguardA_small and bladeguardB_small or 12 copies of bladeguardA and bladeguardB (for a looser fit). Requires 14 m3*10 machine screws and nuts.
The two bladeguard halves should slide into each other quite easily, they are held in place by the m3 screws. Consider using a drop of threadlocker or nylock nuts.
To use, lay the blade on a slightly raised surface (I'm using a sanding block), wrap the blade guard around the blade, then slot together the two halves of the hook and spin the latch 90 degrees to lock it in place.