Filament guide clip for 3D printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this clip for the Two trees Sapphire Pro an similar Core XY 3D printers. Use as is or for extra secure fixing to…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this clip for the Two trees Sapphire Pro an similar Core XY 3D printers.
Use as is or for extra secure fixing to a 10mm flex tube with a 2.5mm tie wrap.
Life of this klip much depends on the filament that will run through it and also the filament used to print it. I suggest 100% infill for this tiny little clip.
If you are anxious regarding wear the just get a 2x3mm PTFE tude and us it as a bushing.
The filament hole of the clip is 3mm ;)
For anyone that want to remix it in some way please navigate to. https://grabcad.com/library/filament-guide-clip-for-3d-printers-1
Enjoy!
stockholmviews.com
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
No
Resolution:
0.4 nozzle, 0.12mm layer height 0.38 line width
Infill:
60-100
Filament: ANY PETG, ASA, PC, HT-PLA depending on your needs and usage. ANY
Notes:
I printed mine in PLA with 100% infill
Category: 3D Printer Accessories