1 / 6
Webcam Logitech C922 Pro Holder for Zebra Series 3 NFC printer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project was created for Rouen Normandy University. The purpose is to read NFC printed card on a Zebra printer
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This project was created for Rouen Normandy University in France. The Purpose is to use Zebra ZXP Series 3 to write NFC previously printed card after a QRcode check. QRcode is read with a C922 Pro Logitech Camera.
- The camera is held in place with a standard M6 screw.
- Use a printable spacer to adapt with your screw length.
- The model can be printed in 1 part or in 2 parts (if needed for mechanical solidity of the parts which can be printed in the ideal direction - see PrintPlate.stl).