SMA connector thumb nut (dust cover)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an extended finger-turnable protective cover nut for SubMiniature version A (SMA) connectors.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an finger-turnable protective dust cover nut for SubMiniature version A (SMA) connectors used on various pieces of radio and optical equipment. It was remixed from MikkoP's original model to add an extension allowing it to be turned when attached to the recessed SMA 906 connectors of Ocean Optics spectrometers such as the USB2000 or USB4000.
Best printed with the threaded opening facing up at 0.1mm layer height. It has worked for me when printed with a 0.6mm nozzle, but the fit is a bit better when printed with a 0.4mm nozzle.