Fish lip gripper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a fish lip gripper and designed this one. The handles need to be glued together. I did this to provide the…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 105
- Wydruki
- 2
- Wyświetlenia
- 1269
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I needed a fish lip gripper and designed this one.
The handles need to be glued together. I did this to provide the cleanest possible inside for the links to rotate.
I may try to combine those models so that they could be printed as a single component.
Print Settings
Printer Brand:
UltiMaker
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
80%
Filament: inland PLA white and gray
Notes:
The holes in the gripper are 3mm. You can use either the brass inserts and nylon screws or anything you like that won't rust in salt water.
The width of the grippers is 12mm. Max jaw open width is 37mmI experimented using PETG. I like the toughness of that material and the UV resistance, but I preferred a more rigid feel that I got using PLA.
Category: Sport & Outdoors