RODAM LK1 (Alfawise U20) Spool Holder Version 1.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used Rodam's excellent Ender 3 spool holder on my Ender 3 pro and wanted to use the same spool holder on my Longer…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used Rodam's excellent Ender 3 spool holder on my Ender 3 pro and wanted to use the same spool holder on my Longer LK1.
You print three of the dowel models, and you use standard 608 roller skate bearings on each of the dowel pieces then you insert the dowel pieces down into the slots on the spool holder.
The spool holder attaches to the metal bracket for the stock spool holder using the same 3mm screws that hold on the stock spool holder.
This is based off of two models, but thingiverse will only let me give credit for one of them.
The main body of the spool holder is from this model. https://www.thingiverse.com/thing:3502973
The backplate piece is from this model. https://www.thingiverse.com/thing:4609728
I used tinkercad to remix this model.
This is version 1.2. Version 1.0, I didn't fuse the backplate to the holder properly in tinkercad. Version 1.1 (shown in the pictures) didn't have the holder vertically centered on the plate, it was too far over to the right. Version 1.2 fixes both of those issues.
Please feel free to remix and share your own version of my re-mix.
Print Settings
Printer:
Longer LK1
Rafts:
No
Supports:
Yes
Resolution:
0.28mm
Infill:
20%
Filament:
Forest Green
Notes:
I printed the model horizontal like you see in the picture. I printed it with 5 walls for extra strength.
Category: 3D Printer Accessories