Minimalistic Businesscard Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a simple and minimalistic cardholder
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like the design, I would appreciate a donation to cults3d.
https://cults3d.com/en/3d-model/home/minimalistic-businesscard-holder
I was looking for a simple and minimalistic cardholder that doesn't need much filament, but i couldn't find a model I liked, so I designed my own.
If you want to edit my design, you can download the fusion 360 file.
You can put up to 26 businesscards into the holder.
My print time per part has been about 17 minutes.
IMPORTANT: There are 2 mirrored pieces so you can place the nicer surface at the outside. If you don't care, you can also print one piece twice.
My Print Settings
Printer brand: Creality
Printer: Ender 2 Pro
Filament type: I use PLA (Prusament Galaxy Black), but PETG or ABS/ASA should also work
Bed position: Flat (Like the model is, you not must rotate it)
Support: Not matter (you don't need it)
Raft: Not matter
Resolution: 0.2 mm
Line width: 0.45 mm
Infill: ~ 15%
Infill Pattern: Gyroid