Mirror Mount Clip (6mm thick mirror)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a bunch of mirrors left over from some bathroom renovations. Rather than throw them away, I decided to mount…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I had a bunch of mirrors left over from some bathroom renovations. Rather than throw them away, I decided to mount them in the garage and in the exercise room. This clip by 'heytiger' was perfect!!! Except my mirrors were too thick (mirrors were 6mm thick, and this design would only accommodate a 3mm mirror) to use them. Rather than scale the clips to be twice as large, I extruded the clip an additional 3mm to fit my mirror to the wall. They are very sturdy and hold the mirrors solidly to the wall.
Thanks 'heytiger'! for the initial design!
Maybe others will find this size useful as well.
Happy printing!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Filament: Hatchbox PLA Black
Notes:
I used 30% infill for strength, but that may really be overkill. I don't think it matters, but I used triangles for the infill shape.
Category: Replacement Parts