Pinch and crimping block for climbing training
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pinch and crimping block used to train your finger strength, supports up to 9mm ropes
- Ocena
- 5 / 5
- Polubienia
- 123
- Pobrania
- 909
- Wydruki
- 7
- Wyświetlenia
- 5431
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a portable pinch and crimp block which can be used with up to 9mm rope, the original is made out of wood and i copied the design which can be 3d printed.
I would highly recommend to sand all the surfaces for better grip, i personally used 60 grit.
Feel free to modify the design as the f3d file is included and upload your remixes
Very big thanks to Dedlok#5332 for having the idea to include the holes for the rope into the model and actually designing it!
Print settings
5 Perimeters, 5 Bot and Top Walls, 20% Rectilinear Infill and no supports
I was able to hang of that with my whole body weight, so crimp training with up to 25-30kg should be very fine