1 / 3
Skirt and inner mounts for bell jar
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shield the base of a vented bell jar and thread tubes inside of it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Skirt and inner mount for bell jar.
In the pictures the skirt design helped in shielding the base of a vented bell jar from fume hood air flow. The inner mounts were glued to the glass so that a tube can be threaded.
This design was used in the following publication: https://doi.org/10.1021/acsearthspacechem.2c00328
Print 4 times and glue the pieces together to get a full circle (33.3 cm ID).
There are two skirt designs, one with a hole (1.1 cm ID) and one without it.