Mosaic Palette 2 extruder clip for Prusa i3 MK3S+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect the Mosaic Palette 2 to the Prusa i3 Mk3S+. Uses a very secure locking clip instead of the rubber grommets.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Using the Mosaic Palette 2 with my Prusa i3 Mk3S+, I first tried one of the available extruder clips based on a rubber grommet. But like mmontminy, I found it not very secure. But I couldn't use his MK2.5s-MK3s Palette 2 Extruder Clip directly, because my printer has been upgraded to a MK3S+, and the filament-sensor cover is a bit different.
So, I reverse engineered the MK3S+ version of the filament-sensor cover as a new Fusion 360 model, and then incorporated mmontminy's locking-clip idea.
I increased the height of the FS cover part slightly, and increased the depth of the PCB clearance recess on the bottom. This was necessary because unlike Prusa's original part, this must be printed facing up, and bridging over the PCB recess sags enough that it interferes with the filament sensor PCB screw.