Pfaff 96 and other Engine pusher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a common failure on these Maschines from the 60s and 70s that the small plastic part that pushes the motor to be…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a common failure on these Maschines from the 60s and 70s that the small plastic part that pushes the motor to be easy on the rubberdrive, breaks after the years.
This part replaces it.
Have fun with your awesome highquality sewingmachine!
Print Settings
Printer:
fullmetal P3
Rafts:
No
Supports:
No
Resolution:
below 0.2mm
Infill:
100%
Notes:
Printet with 1.2mm wall and 100% infill
The centerbore may need to be reamed or rasp to size.
The Bore for the Thread needs to be bord to 3.3mm and than threaded M4.
Smmothing the ramp makes a better userexpierience.
I put a 1.5mm thick M8 washer behind this, to give it some backing.
How I Designed This
allmost identical to the original, but I added a small dent on the highest position to prevent from snaping back.
Category: Replacement Parts