Maglite holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No matter if your house catches fire, or your wife wants you to bring out the garbage at 3am, in emergency cases a…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
No matter if your house catches fire, or your wife wants you to bring out the garbage at 3am, in emergency cases a flashlight allways comes in handy.
But searching for your flashlight in the dark, can cost you that few seconds, that decide between life and death.
So, be prepared!
With this holder, designed for Maglite, your flashlight is always within reach.
Edit 9.4.2017:
Added a Version with countersunk hole on request for direct mount.
Print Settings
Printer Brand:
RepRap
Printer:
fullmetal P3 Steel
Supports:
No
Resolution:
0.2mm
Infill:
30%+
Notes:
This part can be printed in two orientations:
1. Bottom to the Printplateor 2. Back to the Printplate
Although orientation 2 looks amazing while printing, I would recommand the bottom to Printplate orientation, because it needs less retract and should be a little bit stronger, due to layeradhesion.
Printing in this orientation can lead to warping at the front corners if you print without a Brim.
Category: Household Supplies