NZXT H510 Elite Front mesh panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the front glass panel on the NZXT H510 Elite Tower
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 181
- Wydruki
- 0
- Wyświetlenia
- 3104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
These models are not mine I just uploaded it to printables because I thought others might search for something like this.
Notes from the creator: I use superglue to assemble ill add a picture so you can see where everything goes I use 10x1mm magnets I got on amazon and you can buy a mesh filter and cut it to size for some case filtration.
for the inside pieces I use 2 walls, 0 bottom and top layers 28% cubic infill for the pattern (you can experiment with whatever you'd like) and the bars i use standard settings making sure the holes use supports and face down. Print at 99.3% scale.